Paramètres de filetage | Tubage | Gaine | |
2 3/8〞à 2 7/8〞 | 3 1/2〞 à 4 1/2〞 | 5〞et plus | |
Effiler | 1:16 | ||
Pas de filetage | 8 TPI | 6 TPI | 5 TPI |
Advantages:
- La connexion avec un raccord standard peut atteindre la résistance du corps du tuyau.
- Haute fiabilité d’étanchéité, il peut fournir une résistance à la pression interne considérable avec le corps du tuyau.
- Conception anti-grippage
- Perte d’énergie minimale
![](http://upload.digoodcms.com/690/1618970456_premium%20connection-2.png)
Connexion ZC-2 Premium
Tubing main seal is a taper metal to metal seal (50% taper on diameter), which can offer excellent gas tightness even under the most severe combined loads, as encountered in deviated or long horizontal wells applications. Sealing integrity remains constant despite repeated make-ups and break-outs and protects against galling. Casing main seal is a 20o angle taper metal to metal seal, which provides gas tightness under combined loads.Paramètres de filetage | Tubage | Gaine | ||
2 3/8〞à 2 7/8〞 | 3 1/2〞 à 4 1/2〞 | 5〞à 7 5/8〞 | 8 5/8〞et plus | |
Effiler | 1:16 | |||
Pas de filetage | 8 TPI | 6 TPI | 5 TPI | 4 TPI |
Advantages:
- Excellentes propriétés de flexion / compression et torsion
- Étanchéité fiable aux gaz sous n’importe quelle charge combinée
- Facile à utiliser et à entretenir
![](http://upload.digoodcms.com/690/1618970905_premium%20connection-3.png)
Connexion ZC-3 Premium
It is integral connection threaded on plain-end pipe with the OD of the connection totally flush with the pope body. Sizes range from 2 3/8〞to 11 7/8〞for such clearance applications as tubing in small sizes, drilling liners and tie-backs in medium sizes, and contingency liner in larger casing diameters.Paramètres de filetage | tubage | gaine |
2 3/8〞 à 4 1/2〞 | 5〞et plus | |
Effiler | 1:16 | 1:10 |
Pas de filetage | 6TPI |
Advantages:
- Excellente étanchéité au gaz
- Avec un dégagement maximal (100% pelucheux avec corps de tuyau)
- Facile à utiliser et à entretenir
![](http://upload.digoodcms.com/690/1618971021_premium%20connection-4.png)
Connexion ZC-4 Premium
The external and internal thread is machined directly in the pipe without coupling. Joint is used internal and external upset. Taper metal-to-metal internal pressure seal is rated at 100% of the pipe body. The 100% external pressure seal is created at the torque shoulder. ZC-4 has the external and internal sealing capability, which can reach same performance with pipe body.Paramètres de filetage | Spécification |
2 3/8〞 à 4 1/2〞 | |
Fil de discussion | Forme de filetage cylindrique |
Pas de filetage | 6TPI |
Advantages:
- Forte résistance au grippage, durée de vie plus longue
- Excellente résistance à la corrosion sous contrainte H2S.
- Meilleures performances d’étanchéité
- Rapidité de préparation
- La force du raccord fileté est la même que celle du corps du tuyau.
- Haute résistance anti-couple, haute résistance à la flexion et fortes capacités anti-compression.
![](http://upload.digoodcms.com/690/1618971407_premium%20connection-5.png)
Connexion ZC-5 Premium
Joint end is used internal and external upset. The internal and external thread is machined directly in the pipe without coupling. And the thread connection strength is same with pipe body.It used double screw with no interference and multi torque shoulder, which provides excellent gas tightness and strongly anti galling performance. With 7.5°angle on the flank and 45°angle on the stab flank, there is no radial interference between the inner and outer thread. Taper metal-to-metal internal pressure seal is rated at 100% of the pipe body.
Paramètres de filetage | Spécification | |
2 3/8〞à 5〞 | 5 1/2〞 à 7〞 | |
Forme du fil | Forme de filetage cylindrique | |
Pas de filetage | 8 TPI | 4TPI |
Advantages:
- Forte performance anti-grippage
- Excellente résistance à la corrosion sous contrainte H2S
- Avec une capacité de double étanchéité dans l’extérieur et l’intérieur
- Haute résistance anti-couple, haute résistance à la flexion et fortement anti-compression
![](http://upload.digoodcms.com/690/1618971479_premium%20connection-6.png)
Connexion ZC-6 Premium
The external and internal thread is machined directly in the pipe without coupling. Joint is used internal and external upset.Taper metal-to-metal internal pressure seal is rated at 100% of the pipe body. The 100% external pressure seal is created at the torque shoulder. ZC-6 has the external and internal sealing capability, which can reach same performance with pipe body.Paramètres de filetage | Spécification |
2 3/8〞 à 4 1/2〞 | |
Fil de discussion | Forme de filetage cylindrique |
Pas de filetage | 4TPI |
Advantages:
- Forte résistance au grippage, durée de vie plus longue
- Excellente résistance à la corrosion sous contrainte H2S.
- Meilleures performances d’étanchéité
- La force du raccord fileté est la même que celle du corps du tuyau.
- Haute résistance anti-couple, haute résistance à la flexion et fortes capacités anti-compression.